What Are The Pros And Cons Of A Fiberglass Pool?

Can a crack in a fiberglass pool be repaired?

For minor cracks, simply cover it with fiberglass paint.

For more severe cracks, generally cracks that measure between ½-inch deep and extend 1-inch in length on both sides, the crack and surrounding area may need to be sanded down, with any loose particles removed..

Which is better fiberglass or gunite pool?

While they are easier to install, fiberglass pools are nowhere near as durable as a gunite inground pool. The inside surface of this type pool is a gel coat on which the fiberglass has been laminated.

What is the best brand of fiberglass pools?

Top 10 Fiberglass Pool ManufacturersAlaglas Swimming Pools. Alaglas Swimming Pools is located in St. … Barrier Reef Pools. With its roots in Australia, Barrier Reef Fiberglass Pools has a manufacturing facility centrally located in South Carolina. … Blue Hawaiian Fiberglass Pools. … Leisure Pools. … San Juan. … Sun Pools. … Tallman Pools. … Thursday Pools.More items…•

How much is a 12×24 inground pool?

How much does a 12×24 inground pool cost? A small vinyl liner pool that’s about 12 feet wide and 24 feet long might cost you between $25,000 (for the basics) and $35,000 for additional features like heating and fencing.

Why fiberglass pools are bad?

One of the biggest gripes that we see have to do with the slippery surface of a fiberglass pool. The fact is, this material can be so slick that pool users can actually slip and fall. This can be a real problem for pool steps, where a slip-and-fall accident can be dangerous.

How deep can fiberglass pools be?

Most fiberglass pools tend to be 3 ½’ to 5 ½’ deep on pools that are 27′ long and smaller. On pools that are 27′ to 35′ long the depths range from 3 ½’ to 6 ½’. On pools that are 35′ to 44′ long the depths can go anywhere from 3 ½’ to 8 ½’ deep.

Do fiberglass pools look cheap?

Fiberglass pools often looked plain or cheap, simply because technology hadn’t advanced very far yet. … Fiberglass isn’t the cheapest pool option to install (although it still typically costs less than concrete). But it does offer a number of advantages, including a lower cost of ownership.

What is the life expectancy of a fiberglass pool?

25 yearsA fiberglass pool is expected to last up to more than 25 years – the reason they are the most low-cost option in the long run. Their surface does not support algae growth and resists stain, which means maintenance cost and hassle is significantly minimized.

Can fiberglass pools crack?

Fiberglass pools can craze, or check crack from imprecise manufacturing, or when the surface is not fully supported, like under the steps, or areas where the backfill is eroded. Gel coat can also crack during transport and installation, if it gets bumped around too much.

Which pool is better saltwater or chlorine?

Pros. Lower chlorine levels make saltwater pools gentler on skin and eyes. … Chlorine levels in saltwater pools are enough to disinfect, but not enough to fade expensive swimwear and gear. Because of the natural chlorine, saltwater pools require fewer chemicals (and less attention) compared to chlorinated pools.

What type of pool lasts the longest?

Fiberglass, Vinyl, or Concrete – Which Pool Material Last Longest?Fiberglass. Fiberglass pools are highly lauded, and for good reason. … Vinyl. Vinyl liners are the least durable of the three because, well, they’re liners. … Concrete. Concrete pools are extremely durable as well.

Should I buy a fiberglass pool?

Fiberglass pools are incredibly strong and durable—you won’t puncture or damage them through daily use, even if you have a dog that plays in the pool with you. By contrast, vinyl liners are easy to puncture in basic pool use, and on top of that, you have to replace them every 5–9 years, at $4,000 or more each time.

How much does it cost to ship a fiberglass pool?

If you have your pool built and shipped directly to you based on your color and accessories, expect to pay (on average) $1,500 – $3,500 depending on how far you live from a manufacturing plant. The cost per mile is generally broken down based on widths.

Is a fiberglass pool worth the money?

Fiberglass and concrete tend to cost about the same initially. … That said, in terms of total cost of ownership, it’s worth noting that maintaining a fiberglass pool is generally cheaper. That’s because fiberglass is more algae resistant, and therefore could save you money on chemicals over the life of the pool.

Which pool is better fiberglass or concrete?

Fiberglass pools require less maintenance and are easier to keep clean. The smooth surface of the fiberglass makes it easier to control algae and bacteria that may otherwise get caught on the rougher surfaces of a concrete pool. Fewer chemicals are needed in the water to control the bacteria.

How often do you have to resurface a fiberglass pool?

For most fiberglass pools, one would be wise to plan on shell replacement or resurfacing after 20-25 years.

Does a fiberglass pool need a liner?

Is a fiberglass or vinyl liner pool better for me? Vinyl liner pools typically cost about $10,000 less than fiberglass pools upfront. However, they need the liner replaced every 5–9 years and tend to look cheap. Fiberglass pools are much more durable, need less maintenance, and look classy.

What are the benefits of a fiberglass pool?

5 Benefits of Fiberglass Pools Faster installation. Fiberglass pools from Crystal Pools can be installed in as little as seven days. … Durability. Fiberglass pools are stronger, more durable and less likely to be damaged. … Lower maintenance. … No liner replacement or resurfacing needed. … Lower lifetime cost.

Can fiberglass pools be salt water?

Fiberglass swimming pools are very compatible with salt water systems. … Salt water is abrasive on the interior surfaces of concrete/ gunite pools, especially those that have plaster within them. Many families report that they enjoy swimming within a pool that has a salt water system.

Do salt water pools kill bacteria?

Additionally, saltwater alone will not kill bacteria. People who use saltwater pools are still producing chlorine through saltwater generators. Saltwater will sanitize your pool, but it does so through electrolysis, which produces bacteria-killing chlorine.

What is the best color for a fiberglass pool?

Many of the best fiberglass pool colors (at least by popular opinion) fall into the blue family….The fiberglass pool color options that we have seen over the years include:Light blues.Dark blues.Turquoise.Greens.Tans.Greys.Black.White.

How much does a Blue Hawaiian Fiberglass pool cost?

How much does a fiberglass pool cost? Most fiberglass pools cost $45,000–$85,000, including patio and basic accessories. As with any other pool type, this can increase dramatically when you add water features, natural stone hardscaping, multiple accessories, and so on.

What type of pool is easiest to maintain?

The smooth, non-porous surface of a fiberglass pool makes it very difficult for algae to gain a foothold. Consequently, it makes it very easy for you to keep it clean. Corrosion resistant. Fiberglass resists corrosion, so it is an excellent option for popular salt sanitation systems.

How much do Latham fiberglass pools cost?

Overall, you can probably expect your Latham fiberglass pool to cost between $28,000 and $70,000 and up, depending on the pool’s size and your installation package.

What are the disadvantages of a fiberglass pool?

Cons of a Fiberglass PoolLimited shapes and swimming pool designs.No wider than 16’Repairs on some colored finishes do not match.Higher initial cost.

What’s the cheapest inground pool?

Basic vinyl liner pools are the least expensive inground swimming pool option. Vinyl liner swimming pools give you more swim area for the money and cost you less initially than a fiberglass pool or gunite pool.

Which type of inground pool is best?

Gunite. If you are installing a pool in your backyard, there are many types to choose from. A popular choice is a gunite swimming pool because it is highly durable and it can be created in just about any shape. Gunite pools use a rebar framework that is sprayed over with a concrete and sand mixture.