Quick Answer: How Much Horsepower Can A Stock 2004r Handle?

How much does a Turbo 400 transmission cost?

Rockcrawler 400 – 450 HP/TQ capable Price is $2500..

How much torque can a 200r4 handle?

Registered. A stock 200 should handle 350-400hp on the street. With track abuse or big stickies then only 300-350 without issue.

Is the 200r4 a good transmission?

And with the right aftermarket parts and some effort from a GM transmission expert, the 200-4R can go from being an aluminum transmission straight out of the 80s, into being a 21st-century powerhouse for performance-oriented muscle cars, complete with a reliable overdrive and heavy-duty materials.

How much fluid does a 200r4 transmission hold?

11 quarts is correct. Just subtract what you put in the converter to fill that trans.

Will a 200r4 bolt up to a 350?

The 200-4R converters will only interchange with some early 700-R4 transmissions. Turbo 350, 400, or Powerglide converters will not work with a 200-4R. … While you can run a TH350, a TH400, or a Powerglide without the kickdown linkage, it is imperative that the TV cable be installed and connected properly.

How much horsepower can a Turbo 400 transmission handle?

400-450 HPAbout 400-450 HP/TQ is the limit on the stock TH400. With ONE almost free modification and some minor valve body calibration changes, 800 HP on an otherwise stock TH400 is not a problem if it’s assembled well (good endplay, etc), and the 34 element sprag is a wise addition above 450 HP or any drag usage.

Is a Powerglide transmission good?

A Powerglide transmission in combination with a low rear gear is a good choice for quarter-mile cars or performance engines that live in the upper rpm limits. Also with muscle cars that have very large power bands. The aluminum Powerglide, at less than 100 pounds, is ideal for racing applications.

What’s the best transmission for a Chevy 350?

TH350. Best transmission choice, hands down. The Turbo Hydra-matic 350 was first used in 1969 model cars. It was developed jointly by Buick and Chevrolet to replace the two-speed Super Turbine 300 and aluminum case Powerglide transmissions.

What vehicles came with 200r4?

The TH-200-4R was used in GM rear-wheel-drive cars equipped with the 231 Buick, 301 Pontiac, and the Oldsmobile 307, 350 gas and 350 diesel engines from 1981-’90; however, many Chevrolet 267 and 305 V-8s also used the TH-200-4R because of the multi-fit bellhousing.

What is a th200 transmission?

The TH200-4R was used in all GM nameplates, including Cadillac. … Production of this transmission began in 1981 and they were used continually up into the early 1990s. The TH200-4R is an adaptation of the TH200 with the addition of an overdrive drum that adds an overdrive gear.

How do I know if my transmission is 200r4?

Look at the bottom of the transmission pan. According to 442.com, the bottom of all THM-200-4R transmission pans are stamped on the bottom with the word “M E T R I C.”

What is the difference between a 700r4 and a 200r4 transmission?

Strength. A comparison of the 700R4’s first and second gear shows that there is a big difference between them. This results in a larger RPM drop in the gears in comparison to the 200-4R. There is also the longer nature of the 700R4 which requires certain modifications in order to cross member and driveshaft.