Question: Are 882 Chevy Heads Any Good?

Are Vortec heads 23 degree?

GM Performance’s New Vortec Heads Promise Big Flow Numbers For A Modest Investment.

GM Performance responded with the 23-degree, aluminum Fast Burn head.

Its 210cc intake runners and raised intake valves made it capable of supporting more than 500 hp..

Can you put 400 heads on a 350?

The only difference is that 400 heads have steam holes drilled in them for the 400 block. You can put 400 heads on a 350 but you should not put 350 heads on a 400 without drilling the steam holes.

How much HP can Vortec heads make?

GM Vortec cylinder heads are used with a Comp Cams Xtreme Energy 262° camshaft to produce 390 HP and 426 ft-lbs of torque. These numbers are made with 87 octane, while most of the combos on my site used 92 or 93 octane gasoline.

Will 327 heads fit on a 350?

They are perfect for a 350. Both the 327 and the 350 have a 4″ bore so they like the same heads. Old heads like that will have softer valve seats, so if you want them to last a long time, you should either replace the seats or run leaded gas in the engine.

Do aluminum heads make more power?

Aluminum heads will dissipate heat faster. This allows for higher Compression Ratios with less risk of Detonation. The cooler head also delivers a cooler air/fuel mixture to the combustion chamber. Cooler air is denser and can make more power.

Are Vortec heads worth it?

vortec heads are one of the cheapest hp gain and they’ll give you better gas mileage. For the center bolt valve covers the ones for the vortec heads are taller then the center bolt valve covers you find on non-vortec heads.

What are Chevy camel hump heads?

These heads got their nickname because of the raised identification shape on the each end. It’s two half-ovals connected by a straight bar-most easily described as “two humps.” Some of these are also nicknamed “Fuelie” heads because a version appeared on fuel-injected 327-powered Chevy Corvettes.

Are Vortec heads better than double hump heads?

Types of GM Vortec Heads The L31 Vortec heads have larger ports than the older Gen I cast steel heads, so they outflow the older heads. The Vortec heads are a little bit lighter than the older heads and have a “kidney” or “heart” shaped combustion chamber that is more efficient than the double hump chamber.

Can I put Vortec heads on a 327?

The L31 Vortec heads will bolt onto any Gen I small block. Your 327 isn’t any different than any other Gen I small block built from 1955 thru 2002. The main difference with using the Vortec heads is the different intake bolt pattern as already mentioned.

How much horsepower does double hump heads add?

“Double-hump” heads were found on many of its high-performance engines in the 1960s and early 1970s. They were manufactured with larger intake and exhaust port volumes and valves for the period, and engines equipped with them had output ratings of more than 350 horsepower.

Are Vortec heads angle plug?

Premium Member. My vortec heads have angled plugs. I have no problems with the wires.

What is the best cam to put in a stock 350?

COMP Cams CL12-600-4 Camshaft For 350 Chevy – Best Top Pick Review. COMP Cams CL12-600-4 camshaft option is our top pick, and for good cause. With its many great features that will increase the performance of your 350 Chevy significantly, this choice will give you the most horsepower for the most cost-effective price.

What’s the difference between 906 and 062 Vortec heads?

The only difference between the #062 and #906 Vortec head is in the exhaust seat of the HD/1-ton truck #906 version, as described above. The #062 has a 3-angle grind on a standard induction-hardened seat, as does the non-HD #906 head.

Will 283 heads work on a 350?

283 heads are not a good idea on a 350. They will increase your compression, but they’ll kill your overall horsepower by seriously constricting your flow at anything above probably 3000 RPM, so you’ll make no power with them.

Will Vortec heads work on older 350?

night rider Veteran Member. Yes the 1996-02 L31 350 vortec heads will bolt to ANY gen 1 350 engine.

What are Chevy power pack heads?

’47 Chevy COE . and more… The “power pack” heads have 58 CC combustion chambers, and smaller valves than later heads. They were used on high-performance models of the 265 and 283 engines, and were also used on the standard 195-horse 2-barrel 283’s in the later years of that engine.

What are 882 heads?

The 882 heads are smog heads from ’74 to ’80 and not very well regarded, but neither are stock ’85 heads – if you can find out more about the 882’s they may be better than your stock ’85 heads – ie not only polished & ported but if milled so they will give higher compression and if valves were changed to 2.02 etc they …

Why are Vortec heads better?

On the non-bow tie L31 Vortec heads, the ports are larger than the older cast steel heads, so they outflow the older heads. The Vortec heads are a little bit lighter than the older heads and have a “kidney” or “heart” shaped combustion chamber that is more efficient than the double hump chamber.