Is The 351 Windsor A Good Engine?

How much horsepower does a 351 Windsor have?

Ford 351W V-8 SpecsEngine:Ford 351W V-8 (5.8L)Peak Horsepower:• 1969 – 250 hp w/ 2 barrel carburetor, 300 hp @ 5,400 rpm w/ 4 barrel carburetor • 1972 (net power ratings adopted) – 153 hp w/ 2 barrel, 161 hp w/ 4 barrel • 1997 – 205 hp (CA version), 210 hp @ 3,600 rpm • Ford Lightning – 240 hp @ 4,200 rpm16 more rows.

How long will a 351 Windsor last?

it all depends on how hard you run it. could go up to 300,000 miles if you never run it over 3000 rpm or it could last another 50 miles if you run it at say maybe 8000 rpm.

Which 351w block is best?

pb_paulie_b. The 69′ block is the strongest stock 351w block. High nickle content and thicker main webbing. It is also flat at the top of the main webbing.

What vehicle did the 351 Windsor come in?

Ford Mustang Mach 1History. Ford debuted the 351 Windsor in the 1969 Ford Mustang Mach 1 with both two-barrel and four-barrel carburetor configurations.

How much can you bore a 351 Windsor?

U can safely bore it to . 060″ os without any trouble.

Is 302 better than 351w?

Overall a stock 351W is hands down stronger than a stock 302, thicker deck,cylinder walls,bigger head and main bolts, so it may be that the 302 is more easily built.

What’s the difference between a 351 Cleveland and a 351 Windsor?

Windsor valve covers use 6-bolt covers, whereas the Cleveland/Modified uses 8-bolt covers. Timing Chain. Cleveland/Modified engines have the timing chain recessed into the front of the block itself, and its timing cover is essentially just a flat piece of metal.

Will a 351 Windsor fit a 302 transmission?

The 302 and 351 are very similar, just as the 351C, 351M, and 400 are similar but they are not interchangeable across engine classes. No, the fact that a C6 transmission which will bolt up to either a 302 5.0L or 351W 5.8L does NOT mean it will bolt up to a 300 I-6 4.9L.

What is the best carburetor for a 351 Windsor?

The Best Carburetors for 351 Windsor ReviewsMophorn FORD0002YF — Carburetor Heavy Duty 2100 2 Barrel Carburettor.A-Team Performance Ford 2100,A800 — 154 2-BARREL CARBURETOR 2100.AutoHorizon AAUSME000320 — 2 Two Barrel Carburetor 2100 For Ford 351.AUXMART 70018229 — Carburetor New 2100.More items…

How much horsepower can a 351 Windsor block handle?

700 hpPretty much any 351W block should handle 700 hp, however there are a ton of factors which may kill one +/- that mark. Don’t know what you are building but maybe consider an SHP block if you are getting into that power neighborhood and adding spray.

Will 351 Cleveland heads fit a 351 Windsor?

351C heads will not work on a 351W block without drilling new water jackets in the heads. A 351C intake will not work at all on a 351 W.

Will a 351w distributor fit a 302?

Registered. Windsor distributors can be interchanged between all engines from 221 cid to 5.0L. However, because of the taller deck height, a 351W distributor is longer, and will not fit a 302 block, nor will a 302 distributor fit a 351W.

Will a 302 intake fit a 351 Windsor?

The 351 Windsor is a taller block engine, therefore the the distance between the heads is wider than that of the 302. In short, no it will not fit. No, the 351w is not the same block.

What year is the best 351 Windsor?

1969Best years From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.

Which engine is better 351c or 351w?

“The 351W is a basic 302-type engine. The 351C engine got all the hype, but what we race today is the basic W or a combination of the two. The W is a better engine for long-lived low RPM power. It needs proper preparation to race, and, as it has the better torque curve on the low end, it is not a high rpm engine.

How can I get more horsepower out of my 351 Windsor?

351W Performance TricksFlow: The Key to Building Horsepower. The key to making more horsepower in the 351 Windsor, or any engine, is to move more gas/air mixture through the engine. … Removing Flow Restriction. A cylinder head flows as well as its most constricted part. … Exhaust Headers. … Cylinder Head Flow. … Interchangeable Heads.

Will 351 heads fit a 302?

The 351 intake will not fit the 302 at all, it’s too wide. Early 351 heads had bigger valves but also a larger cumbustion chamber. Ford used to sell head bolts made for this. If the heads are for a later 351W, don’t even bother.

How much does it cost to rebuild a 351 Windsor?

If they bore it out (say 0.030 which it will likley need if it’s got 160K on it) you’ll need at least new pistons as well as of course all new bearings and such. Ask around your area and find a trustworthy, reputable guy. Ballpark, I’d say about $2500 for the machine work, rebuild kit, cam, assembly, balance.